Fluimac Pumps

Sale, purchase of FLUIMAC diaphragm pump

FLUIMAC is one of the most famous and reliable Italian companies that produces diaphragm pumps, small, pneumatic, 24-volt diaphragm pump, piston pump, explosion-proof, sanitary, with American FDA standard, with PHOENIX RANGE series control . FLUIMAC company was established in the previous decades and started producing all kinds of diaphragm pumps, dosing pumps, peristaltic pumps, polymer pumps with various flow rates and sizes.

FLUIMAC company has valid international standards such as: ISO 9001, FDA, CE, ATEX, EAC. FLUIMAC Diaphragm pumps are one of the most famous diaphragm pumps in the world and have excellent quality, reasonable price and high efficiency. These pumps have a one-to-one ratio and one time output is provided for one input of the compressor.

FLUIMAC Italy’s official distributor of diaphragm pumps

AODD Company is the official sales representative of FLUIMAC diaphragm pumps in Italy and has beenactive in the field of consulting, supplying, and selling all kinds of air and pneumatic equipment such as: diaphragm pump, dosing pump , roots blower , side channel , diffuser , side channel and blower repairs . At the service of respected customers. Please contact the experts of Sanako company to place an order and inquire about the price. FLUIMAC diaphragm pump offered by Sanako company has excellent quality and reasonable price and will be sent as soon as possible to serve our respected customers. Sanako company is also active in selling all types of stock diaphragm pumps, Iranian diaphragm pumps, body stock diaphragm pumps, etc.

Types of FLUIMAC diaphragm pumps

Diaphragm pump Floimac series p7, p18, p30, p50, p65, p100, p160, p250, p400, p500, p700, p1000
PHOENIX PHOENIX series pump
PHOENIX PHOENIX ATEX series pump
PHOENIX FOOD PHOENIX series pump
FLUIMAC teflon pump
Magnetic pump
Dosing pump
FLUIMAC cache drain pump
Peristaltic pump
Polymer pump

Brands producing pneumatic, air, diaphragm pumps

GRACO HUSKY America
FLUIMAC Italy
Wilden WILDEN England
Yamada YAMADA Japan
River View RIVER WAVE China
Lutz LUTZ Germany
American ARO
Run RAN Türkiye
DEBEM, Germany
Argal ARGAL Italy
POMKAR Türkiye
Sandpiper American SANDPIPER

AODD Company has the official sales representative of the brands mentioned above. Please click on the link below to download the Floimac diaphragm pump catalog.

The download link for FLUIMAC Italy diaphragm pump catalog

What is a diaphragm pump and how does it work?

Diaphragm or pneumatic pump is a subset of positive displacement pumps and is driven by wind power. One of the advantages of this is that it is anti-explosion and can work in many environments and fluids. The way the pump works is that the air pressure causes the diaphragm to move to one side and a vacuum is created on the other side. With the movement of the diaphragm, the fluid is sucked into the pump, and in the next step, the ball moves up and the fluid is discharged.

Due to the absence of driving electricity, this pump has anti-explosion properties and is very efficient. By adjusting the air pressure, the flow rate can be changed. Due to the reciprocating movement of the diaphragm, there is oscillation and vibration at the output of the pump, and a damper can be used to eliminate this vibration. By downloading the catalog and reading it, the amount of noise, flow and pressure of each pump model is determined.

FLUIMAC self-priming pump body material

AL aluminum (for use in general and wear-resistant applications)
Ductile iron (used for abrasive materials and slurry, it is weak and fragile against impact.)
STAINLESS STEEL (for use in all kinds of acids and corrosive substances, resistant to wear and corrosion)
KYNAR Kaynar PVDF (for use in cases where there is very corrosive acid and is resistant to wear.)
PP Polypropylene (to be used for acids and bases – the type of acid compound and the amount of concentration as well as its working temperature are very important.)
PTFE Teflon (wear-resistant and compatible with all types of acids and bases and chemicals)
Acetal Acetal (resistant to wear)

FLUIMAC air pump diaphragm material

HYTREL is suitable for fluids such as: low temperature and abrasive materials
NITRILE Nitrile
NEOPRENE Neoprene
VITON
ABS Teflon
SANTOPRENE Santoprene suitable for solvent fluid and dilute acid
NBR or rubber suitable for liquids such as: water, oil, chemicals
EPDM suitable for liquids such as: dilute acid, alcohol, acetone
Teflon PTFE is suitable for fluids such as: acid and corrosive substances, non-sticky, chemical substances

How to install FLUIMAC diaphragm pump

Installation as positive suction
Self-suction installation
Submerged installation
Mobile installation

Technical specifications of FLUIMAC diaphragm pump PHOENIX series p7, p18, p30, p50, p65, p100, p160, p250, p400, p500, p700, p1000

PHOENIX series has an inlet and outlet diameter of 1/4 to 3 inches
PHOENIX series with 8 bar working pressure
PHOENIX series has a flow rate of 18 liters per minute
It has a body made of polypropylene PP, PVDF, steel 304, steel 316, aluminum
Ability to work in zone 1 and 2
Anti-explosion capability
Ability to work at a temperature of 7 degrees Celsius
To transfer sauce, paste, oil, chocolate, acid, base, toxic substances, oil, etc.
It has a flow rate of 1050 liters per minute
It has a maximum suction of 5 meters
Ability to transfer fluid with 10 mm particles
Flowmak diaphragm pump has sizes p7 size 1/4 inch, p18 size 3/8 inch, p30 size 1/2 inch, p50 size 1/2 inch, p65 size 1/2 inch, p100 size 3/4 inch, p160 size 1 inch, p250 size 1/4 inch, p400 size 1.5 inch, p500 size 1.5 inch, p700 size 2 inch, p1000 size 3 inch.

Technical specifications of Fluimac P7 diaphragm pump
Inlet and outlet size	¼ inch
Air inlet size	4 mm
Maximum flow (flow rate)	8 liters per minute
Maximum suction	3 meters
The largest size of suspended solid particles	2.5 mm
Sound noise level	62 dB
Maximum transition viscosity	6000 centipoise

.

Technical specifications of FLUIMAC P18 diaphragm pump
Inlet and outlet size	⅜ inch
Air inlet size	6 mm
Maximum flow (flow rate)	20 liters per minute
Maximum suction	6 meters
The largest size of suspended solid particles	3 mm
noise level	65 dB
Maximum transfer viscosity	12000 centipoise

.

Technical specifications of Fluimac P30 model diaphragm pump
Inlet and outlet size	½ inch
Air inlet size	6 mm
Maximum flow (flow rate)	35 liters per minute
Maximum suction	5 meters
The largest size of suspended solid particles	3.5 mm
Pump noise level	65 dB
Maximum transition viscosity	15000 centipoise

Technical specifications of FLUIMAC P50 diaphragm pump
Inlet and outlet size	½ inch
Air inlet size	3 mm
maximum flow (flow)	55 liters per minute
Maximum suction	6 meters
Maximum size of suspended solid particles	3 mm
The amount of noise	68 dB
The highest transfer viscosity	20000 centipoise

Technical specifications of Fluimac P65 model diaphragm pump
Inlet and outlet size	½ inch
Air inlet size	⅜ inch
maximum flow (flow)	70 liters per minute
Maximum suction	6 meters
The largest size of suspended solid particles	3.5 mm
The sound of the pump	72 dB
The highest transfer viscosity	25000 centipoise

.

Technical specifications of FLUIMAC P100 diaphragm pump
Inlet and outlet size	¾ inch
Air inlet size	⅜ inch
maximum flow (flow)	110 liters per minute
Maximum suction	6 meters
The largest size of suspended solid particles	3.5 mm
The sound of the pump	72 dB
The highest transfer viscosity	25000 centipoise

Technical specifications of Fluimac P160 diaphragm pump
Inlet and outlet size	1 inch
Air inlet size	½ inch
Maximum flow (flow rate)	170 liters per minute
Maximum suction	6 meters
Maximum size of suspended solid particles	7.5 mm
Pump noise	75 dB
The highest transfer viscosity	35000 centipoise

Technical specifications of FLUIMAC diaphragm pump P250
Inlet and outlet size	1 ¼ inches
Air inlet size	½ inch
Maximum flow (flow rate)	250 liters per minute
Maximum suction	6 meters
The largest size of suspended solid particles	7.5 mm
The sound of the pump	75 dB
The highest transfer viscosity	35000 centipoise

.

Technical specifications of Fluimac P400 diaphragm pump
Inlet and outlet size	1 ½ inches
Air inlet size	½ inch
maximum flow (flow)	380 liters per minute
Maximum suction	5 meters
The largest size of suspended solid particles	8 mm
The sound of the pump	78 dB
The highest transfer viscosity	40,000 centipoise

.

Technical specifications of FLUIMAC P700 diaphragm pump
Inlet and outlet size	2 inches
Air inlet size	¾ inch
maximum flow (flow)	700 liters per minute
Maximum suction	5 meters
The largest size of suspended solid particles	8.5 mm
The sound of the pump	78 dB
The highest transfer viscosity	50,000 dB

.

Technical specifications of Fluimac P1000 diaphragm pump
Inlet and outlet size	3 inches
Air inlet size	¾ inch
maximum flow (flow)	1050 liters per minute
Maximum suction	5 meters
The largest size of suspended solid particles	10 mm
Pump noise	78 dB
The highest transfer viscosity	55000 centipoise

.

Advantages of FLUIMAC diaphragm pump

Very high safety
Easy to install in different ways
It has high self-suction and negative suction properties
With variable pressure and flow rate
Can be immersed in liquid
No need for mechanical seals
Easy maintenance and repairs
It has a very low seat
The ability to transfer fluids with solid particles
Ability to operate dry
Ability to produce in all kinds of materials and sizes
Easy to use
Reasonably priced
Easy portability
It is explosion-proof.
Ability to transfer flammable liquid
Ability to work in wet environments
Ability to adjust flow rate and inlet air
Ability to pump thick fluid

Application of FLUIMAC diaphragm pump

To transfer Rab
To transfer the sauce
To transfer the jam
To transfer syrup
To transfer chocolate
To transfer salt water
To transfer the dough
Color transfer direction
To transfer resin
To transfer solvent
To transfer latex
To transfer silica
To transfer glue
To transfer oil
To transfer oil
To transfer gasoline
To transfer acid and base
Pharmaceutical and food industries
To transfer the shampoo
To transfer sulfuric, nitric, hydrochloric acid
For sludge pumping
To move ceramic tile glaze
24 volt electric diaphragm pump
Color small diaphragm pump

All types of self-priming pump sizes

1/4 inch
3/8 inch
1/2 inch
3.4 inches
1 inch
1/2 1 inch
2 inches
3 inches

The flow rate of diaphragm pumps ranges from 5 to 1000 liters per minute or 300 GPM or 62 cubic meters per hour. The maximum head and working pressure is equal to 7 to 8 bar or 80 meters.

Types of FLUIMAC diaphragm pumps based on input and output

with side inlet and outlet

with intermediate input and output

With input and output of two parts

How to install, start and maintain diaphragm pump repairs

Among the advantages of the air pump, we can point out the variety of installation inside and outside the fluid. We need wind pressure to start this pump. If we adjust the air pressure, we can get the required flow rate. Thick and corrosive fluid such as paint, acid, base, food, toxic and chemical substances are transported with this pump. This pump can be used in suspended, immersed in fluid, outside fluid, on barrel, mobile, below fluid level, etc. AODD Company sells all parts of Floimac diaphragm pumps such as: diaphragm, ball, seat, kit, O-ring, manifold. In case of pump failure, AODD company will repair it and deliver it to the respected customers with high quality and guarantee.

Technical specifications of FLUIMAC PHOENIX ATEX explosion-proof diaphragm pump

It has EX standard with EX II 2/2 protection level suitable for ZONE 1
It has a size of 0.25 to 3 inches
It has a flow rate of up to 1050 liters per minute and a pressure of 8 bar
It has steel, aluminum, PVDF, PP materials
Standard EX II 2/2 GD c IIB T4
Suitable for petrochemical industries, refineries, printing, food, automotive, etc.

Technical specifications of FLUIMAC PHOENIX FOOD sanitary diaphragm pump

It has the American FDA food standard.
It has a 316 stainless steel body and Teflon diaphragm.
Suitable for food and pharmaceutical industries
It has heat tolerance up to 95 degrees Celsius.
It has a flow rate of 1050 liters per minute and a pressure of 8 bar.
It has a size of 3/4 inches to 3 inches
Easy to wash and disassemble

Internal components of a diaphragm pump

body
bullet
kit
Site
Oring
Diaphragm
Manifold

How to choose and read the plate of FLUIMAC diaphragm pump

In order to choose a diaphragm pump, the type of fluid, the amount of corrosiveness, viscosity, temperature, and suspended solid particles must be known. After defining the parameters, we should use the charts and curves in the catalog. Other important parameters can be specified in the curve of each pump model based on pressure and flow rate. The higher the viscosity, the lower the flow, so a stronger pump should be chosen. The code of Floimac diaphragm pump is in the form of P, which is followed by the size of the pump, then the body material, the diaphragm material, the bullet material, the seat material, the gasket, the number of inlets and outlets, explosion-proof certification, and the type of inlet and outlet connections.

FLUIMAC diaphragm pump price list

Row	Description	price (tomans)
1	The price of FLUIMAC PHOENIX PHOENIX series pump	Call.
2	The price of FLUIMAC Phoenix series pump	Call.

Row	Description	price (tomans)
1	P7 series diaphragm pump	6,000,000
2	P18 series diaphragm pump	7,000,000
3	P30 series diaphragm pump	7,500,000
4	P50 series diaphragm pump	8,000,000
5	P65 series diaphragm pump	10,000,000
6	P100 series diaphragm pump	12,000,000
7	P160 series diaphragm pump	15,000,000
8	P250 series diaphragm pump	18,000,000
9	P400 series diaphragm pump	22,000,000
10	P500 series diaphragm pump	25,000,000
11	P700 series diaphragm pump	28,000,000
12	P1000 series diaphragm pump	32,000,000