Pro – Diaphragm pump with filter press for the mud pump from the bottom of the mud holder tank in the filter press are used. These pumps are ideal because you can putty, which is generally about the consistency of a check shake.
pump Diaphragm is usually slowly start to work, and slowly rises. When the pump starts to slow down by one (30 to 60 seconds between full drift), etc. they are usually indicative of being filled with the filter press. At this stage, feed pump must be turned off and the valves on the filter press closed, because the operator for the implementation of the air blowing process to be prepared. Diaphragm pump can be rotated manually or an automatic pump control system added. This pump with 25 psi setup, then at 50, ed. 75 and finally 100 psi, appears to be the working pressure of the pump.
Met-Chem diaphragm pumps in the size of the following offers: 1., the 1.5, 2, and 3. Material of construction, iron or steel and not aluminum, steel, plastic, poly Peru or stainless steel is different.
With the purchase of a new Met-Chem filter press , etc. Met-Chem can air operated diaphragm pump , you need to base filter press you have attached not. This option also includes a flexible plastic pipe, it is the outlet of a diaphragm pump for the supply pipe, Central, ETC…. air filter, regulator and روغنگیر connect. We can also see a diaphragm pump installed to press your existing offer.
Feed pump for space duty, process, package, a page, a package with a suspension when
The advantages of the plastic pump for MSE FILTERPRESSEN®
- Run hard, dry, try
- Compilation and self-regulation
- Pressure supply up to 16 bar
- Delivery at 24 cubic meters per hour
- Compact design, only a few components
- The proportion of high pressure up to 1:2
- Easy to maintain
- Many kinds of design and also the different materials is available
- Rotation montage
- Also in PE and PTFE, etc. conductive version for ATEX certificate available
The advantages of the metal casting pump for MSE FILTERPRESSEN®
- Pump flange compartments
- Rotation montage
- Aluminum
- In acciaio inox 1.4404 (SS 316L)
- Just a few components
- Sandwich membranes, smooth
- Compact design
- Low forecast consumption
- Dead spaces reduced to a minimum
- Maintenance
- Lots of kinds of designs
Pneumatic diaphragm pump
Diaphragm pumps, air-operated positive displacement pumps, which are due to the simple operating principle and the compact and reliable design for most industrial applications are suitable. Diaphragm pumps, pneumatic, in addition to the quality of work and high technology, is an innovative simple and compact design specify your work. Design of various types of installation, not, etc…. so that the pump can be found in almost every park, a car and integration. Pneumatic diaphragm pump can be input. by suction or dipped design.
Design features of the pneumatic diaphragm pump
Pneumatic diaphragm pump of a compartment, the track consists of two diaphragms is formed by a connecting rod attached. These are outside your environment, the transfer, and inside with compressed air, under the pressure of the fall. When the diaphragm and the final position for its audience, a hole through the connecting rod is activated compressed air to the diaphragm, the other converts. As only positive displacement pump, the volume and delivery with the pressure, the pressure can be adjusted.
Plastic pump, PE, PTFE
Especially in the technology level, mud with salt or کلریدها and other offensive material need to transfer there. Although this kind of gender-neutral sludge, but the chemical components still attack metal material. This includes most types of metal hydroxide slime can be. In addition, the air in the wastewater factory often contains acid. Thus, pump, plastic, resistant to acids and wear, for this applications are appropriate, such as the content of aggressive chemicals, etc. viscous or contains solids. All parts of the chamber in contact with the product in solid polyethylene (as an alternative to PTFE), with booster pages in stainless steel were made. Parts, fasteners, exterior, even stainless steel is made. Elements connecting the pumps can also be infinitely rotated 180 degrees and to connect them to almost any linear can be used. PE with high abrasion resistance is determined. This makes the pump ideal for use with abrasive slurry. PTFE also, almost against chemicals, even in the highest temperature range and resistant. In cases where explosive atmosphere may occur., ATEX certified conductive plastic pumps are also available.
Metal casting pump
In many cases, Miry, which should be the filter press to be transferred chemically neutral, as well as the absence of material is not offensive. This also includes the mud, the mill, etc…. stone powder, or other oily or blue suspension, without aggressive chemical additives. For these applications they can be pumps, aluminum high pressure and inexpensive to use. In particular, where high temperatures, with aggressive chemical sludge occurs, etc. stainless steel series, it is recommended to be up to a temperature of 110 degrees centigrade used. Metal melting pumps in ATEX certified versions are also available.
The advantages of the centrifugal pump from MSE FILTERPRESSEN®
- The construction is simple, only a few pieces of furniture, the proportion of long life
- Relatively cheap
- Flow speed easily through the valve, line pressure or through speed is adjustable
- High speed, high straight drive through electric motor or turbine is feasible
- The limitation of the internal pressure without the need to touch ensure
- The smoothness of the best, as the balance of good mass and oscillating mass lose
- Continuous feed, no filter press beats – solids are also transferable
- Focus on high power and space, the installation of small